Keyword |
Fixed input? |
Example |
Comment |
IMPEX.VERSION |
"2.0" |
|
don't change this, it defines the software version |
type |
"0" |
|
|
STTimeIntervals |
none |
"2013-12-04T00:30:00" |
here you can define time intervalls, when the target has to be observed; easier to fill out directly in p2pp |
calibrationReq |
none |
"Please take 2 ThAr exposures before and after the science exposure, thanks!" |
here you can give advises to the astronomer who is executing your run, which (additional) calibrations are needed |
InstrumentComments |
none |
|
Give comments concerning the instrument (nowadays not possible anymore) |
userComments |
none |
"RV standard, take once every night" |
Give comments concerning the execution etc. |
userPriority |
none |
"1" |
Priority of this object (the smaller the number the higher the priority) |
LineNumber |
none |
"0" |
|
name |
none |
"Mohler_HD10700_objsky" |
name of the OB |
finding_chart_list |
none |
"HD_10700.jpg" |
Name of finding chart file (has to be in .jpg format) |
comments |
none |
"very variable target!" |
comments concerning the target |
objectClass |
none |
"Brown_dwarf" |
object class (drop down menu in the p2pp interface) |
ra |
none |
" 01:44:05.127" |
right ascension of the object (hh:mm:ss.sss) |
dec |
none |
"-15:56:22.400" |
declination of the object (+/-dd:mm:ss.sss) |
epoch |
none |
"2000.0" |
epoch of the coordinates above |
equinox |
none |
"2000.0" |
coordinate system reference date |
propDec |
none |
"0.0" |
proper motion in declination (arcsec/yr) |
propRA |
none |
"0.0" |
proper motion in right ascension (arcsec/yr) |
diffRA |
none |
"0.0" |
Moving target differential motion in RA (arcsec/sec) |
diffDec |
none |
"0.0" |
Moving target differential motion in DEC (arcsec/sec) |
TARGET.NAME |
none |
"HD10700" |
Target name (as it will appear in the ESO archive!) |
air_mass |
none |
"2.0" |
Constraint for maximum airmass during observations (between 1.0 and 5.0) |
fractional_lunar_illumination |
none |
"1.0" |
Constraint for maximum lunar illumination during observations (between 0.0 and 1.0) |
sky_transparency |
none |
"Clear" |
Constraint for sky transparency during observations (photometric, clear, thin/thick cirrus) |
moon_angular_distance |
none |
"10" |
Minimum moon angular distance during observations (deg) |
seeing |
none |
"2.0" |
Maximum seeing during observations (between 0.2 and 2.0 arcsec) |
CONSTRAINT.SET.NAME |
none |
"P1 3.5mag" |
It makes sense to give here the priority and magnitude of the target since it will be directly visible in the p2pp list and it can be sorted according the brightness |
longDescription |
none |
|
|
IPVersion |
"89.01" |
|
Don't change! |
instrument |
"FEROS" |
|
obvious |
OBSERVATION.DESCRIPTION.NAME |
none |
"0144-1556" |
makes sense to give a shortcut of the coordinates here, since it appears like this in the p2pp list and it can be sorted according the object coordinates. This allows the observer to plan the observations during the night. |
ACQUISITION.TEMPLATE.NAME |
"FEROS_ech_acq" |
|
don't change! |
ACQUISITION.TEMPLATE.NAME |
"FEROS_ech_acq" |
|
don't change! |
TEL.TARG.OFFSETALPHA |
"0" |
|
don't change! This keyword would give an offset in RA to the telescope! This is not necessary! |
TEL.TARG.OFFSETDELTA |
"0" |
|
don't change! This keyword would give an offset in DEC to the telescope! This is not necessary! |
TEL.AG.FIBSELEC |
"OBJFIB" |
|
don't change! This keyword defines which fibre is pointed towards the object! |
TEL.AG.START |
"T" |
|
don't change! |
TEL.PRESET.NEW |
"T" |
|
don't change! |
TEMPLATE.NAME |
"FEROS_ech_obs_objsky" |
|
don't change! |
DET1.READ.SPEED |
none |
"225kHz,1,low" |
Readout speed of the CCD (60kHz,1,high or 225kHz,1,low or 625kHz,1,med) |
DET1.WIN1.UIT1 |
none |
"120" |
Exposure time in seconds (between 0.0 and 43200.0) |
DET1.WIN1.BIN |
none |
"1" |
CCD square binning |
SEQ.NEXPO |
none |
"1" |
Number of exposures |
SEQ.TYPE |
none |
"SCIENCE" |
Choose from STANDARD, SCIENCE, FLUX_STD, RV_STD, TELLURIC_STD, SKY (to appear in the ESO archive) |
INS.ADCA |
none |
"IN" |
Use atmospheric dispersion corrector? (IN, OUT or AUTO) |